• E01205_FRONT
  • E01205_CLOSEUP1
  • E01205_CLOSEUP2
  • E01205_CLOSEUP4
  • E01205_CLOSEUP6

Beretta Holster mod. Civilian Kit for pistol mod. APX RH

4 out of 5
read reviews
# E01205
$49.00

Thermo formed ABS* holster, thanks to a reduced spacer and size it is ideal for concealed carry - both for police, military as well for sport (IDPA, IASC).

Description Expand Content Trigger

Beretta Holster for pistol model APX - RH
 
Thermo formed ABS* holster, thanks to a reduced spacer and size it is ideal for concealed carry - both for police, military as well for sport (IDPA, IASC).
The PADDLE BELT attachment allows to carry the holster without the belt, the holster will stay stable during the extraction of the pistol.
Our holster the Civilain Ghost with high ride system can be used with all kinds of belts (3,5 – 5,5cm). 
Holster comes with Padle, High Ride System and Low Ride System.
Color: Black
 
* The advantage of ABS is that this material combines the strength and rigidity of the acrylonitrile and styrene polymers with the toughness of the polybutadiene rubber. The most important mechanical properties of ABS are impact resistance and toughness. A variety of modifications can be made to improve impact resistance, toughness, and heat resistance.

 

Reviews Expand Content Trigger

Average Rating

4 out of 5
 

Based on 3 reviews

33% would recommend this item to a friend.

0% Rated this
0% Rated this
 
 
 
 

5 out of 5 people found the following review helpful

4 out of 5

Great for the Range

 

This is a basic belt holster and is great for the range; however, it is not suitable for concealed carry. It appears to be reasonably well constructed. If you are looking for an ABS range holster you won't go wrong with this one.

Would you recommend this product to a friend? Yes
 
 

2 out of 3 people found the following review helpful

5 out of 5

Not too good

 

With not many options out there this holster was still disappointing. The edges were a little rough and not finished and it just felt light and flimsy, like the weight of a cheap 3D printed thermoplastic. The retention is a serious issue, as the holster puts pressure on the slide and not the frame. I ended up with a bunch of plastic shreds where the serrations had scraped away the interior walls of the holster. Whether it scratched into the plastic or not made the draw unpredictable. It also marred the finish on the serrations after about 50 holster-unholsters. The inconsistent retention made drawing difficult, and made the long drop holster arm unusable for me, because it would cant up and into my body on the draw. This may be OK for casual range use, but for any serious training it's not too good.

Would you recommend this product to a friend? No
 
 
LIVE TEST Horizontal Responsive