Beretta Set of 2 Deluxe Snap Caps for shotguns Reviews

Back to Beretta Set of 2 Deluxe Snap Caps for shotguns

Most Helpful Positive Review

14 out of 14 people found the following review helpful

5 out of 5

Best snap caps ever

 

I kept buying and using the various plastic snap caps from Beretta, Tipton, and MTM. The plastic Beretta and Tipton ones sooner or later break at the rim and the whole thing falls apart. Maybe it's because my 682 is hard on them. The MTM one is unbreakable but the yellow dummy primer doesn't hold up to a lot of dry firing. I like these metal Beretta snap caps. They're HEAVY. Has a brass dummy primer spring loaded. I feel these will last a lifetime

Most Helpful Critical Review

1 out of 1 people found the following review helpful

3 out of 5

Quality snap caps, but check your fit.

 

These are well-made and nice looking, but they fit so tightly in my Blaser F3 that they would not extract, or indeed even budge, when I broke the gun. I had to disassemble the gun, pry at the injectors, and do all manner of things one should never do to a shotgun before eventually sending a bore brush down the barrel from the other side to bang them out. I may have gotten a defective batch, but if not I suggest Beretta note somewhere in the product description that these will not necessarily fit non-Beretta shotguns. This is the first time I've ever had such a critical but universal item not fit as it should. Long story short: very nice, and high-quality, but not necessarily a universal fit.

Would you recommend this product to a friend? Yes

Average Rating

4.8 out of 5
 

Based on 9 reviews

67% would recommend this item to a friend.

0% Rated this
0% Rated this
0% Rated this
 
 
 
 

14 out of 14 people found the following review helpful

5 out of 5

Best snap caps ever

 

I kept buying and using the various plastic snap caps from Beretta, Tipton, and MTM. The plastic Beretta and Tipton ones sooner or later break at the rim and the whole thing falls apart. Maybe it's because my 682 is hard on them. The MTM one is unbreakable but the yellow dummy primer doesn't hold up to a lot of dry firing. I like these metal Beretta snap caps. They're HEAVY. Has a brass dummy primer spring loaded. I feel these will last a lifetime

 
 

3 out of 4 people found the following review helpful

5 out of 5

Chrome snap caps

 

Yesterday, after shooting, I inserted the snap caps and one slipped past the ejector preventing me from closing my new Beretta shot gun. Also the center portion of one of the snap caps keeps popping out about one eighth of an inch. I have other sets without problems. It does seem that the rim on my 20ga snap caps are a bit too narrow.

Would you recommend this product to a friend? No
 
 

2 out of 2 people found the following review helpful

5 out of 5

Beautiful...but...

 

Very nice, but unfortunately I had to return because I could not close my new Silver Pigeon 1 with this item. Cheaper Beretta snap caps work fine, really wish these would have worked because they are gorgeous.

Would you recommend this product to a friend? Yes
 
 

1 out of 1 people found the following review helpful

5 out of 5

Great product

 

Work much better than either the plastic variety or the aluminum ones. Fit better and eject better

Would you recommend this product to a friend? Yes
 
 

1 out of 1 people found the following review helpful

5 out of 5

Awesome Snap Cap

 

These are very High Quality Snap Caps that are even Serialized. They Fit My 692 Skeet like a glove. I also have some Brass ones I got from Midway USA and the Chrome ones from Beretta are way better quality. Almost don't want to use them because they are so nice.

Would you recommend this product to a friend? Yes
 
 

1 out of 1 people found the following review helpful

3 out of 5

Quality snap caps, but check your fit.

 

These are well-made and nice looking, but they fit so tightly in my Blaser F3 that they would not extract, or indeed even budge, when I broke the gun. I had to disassemble the gun, pry at the injectors, and do all manner of things one should never do to a shotgun before eventually sending a bore brush down the barrel from the other side to bang them out. I may have gotten a defective batch, but if not I suggest Beretta note somewhere in the product description that these will not necessarily fit non-Beretta shotguns. This is the first time I've ever had such a critical but universal item not fit as it should. Long story short: very nice, and high-quality, but not necessarily a universal fit.

Would you recommend this product to a friend? Yes
 
 

1 out of 1 people found the following review helpful

5 out of 5

These do not fit a 686 Silver Pigeon I Sporting

 

These are very attractive snap caps. I bought them for my brand new 686 Silver Pigeon I Sporting. Not only could I not close the action with them installed, but the one in the bottom barrel got stuck. Took me 3 hours to remove it with copious amounts of lubricant and tapping with a wooden dowel. Not sure what other options exist. Thought these were the best. Guess not.

Would you recommend this product to a friend? No
 
 
5 out of 5

Great!

 

Beautiful product! It's quality and heft reminds me of my metal banded wrist watch. You get what you pay for.... Buys these.

Would you recommend this product to a friend? Yes
 
 
5 out of 5

Great Snap Caps

 

Bought these for my new 20 Guage Beretta field gun. I shopped other manufactures but these are quality items as us all the Berteea products I’ve purchased. The price was also “right”. There is nothing not to appreciate with these Snap Caps.

Would you recommend this product to a friend? Yes