Most Helpful Positive Review

1 out of 1 people found the following review helpful

5 out of 5

Best pusher for rear sight

 

Even though this doesn't work for the front sight, this is by far the best sight pusher I've used. If you want to replace or adjust your rear sight without making marks on your slide, this is what you want. It's strong, solid, and works with no other tools. No more putting your slide in a vice or driving with a punch. .

Most Helpful Critical Review

1 out of 1 people found the following review helpful

3 out of 5

Problem with target sight installation

 

I used this tool to exchange the original 92FS sight with the 92FS target sight. Removal of the original sight was easy. Initial installation of the new target sight was easy. However, removal of the assembled slide and target sight was not. I had to back off the sight to the left about 1/2 to remove the assembly and then finish the installation with a punch and light hammer. In the end it still made the install go OK.

Average Rating

4.7 out of 5
 

Based on 6 reviews

33% would recommend this item to a friend.

0% Rated this
0% Rated this
0% Rated this
 
 
 
 

1 out of 1 people found the following review helpful

5 out of 5

Best pusher for rear sight

 

Even though this doesn't work for the front sight, this is by far the best sight pusher I've used. If you want to replace or adjust your rear sight without making marks on your slide, this is what you want. It's strong, solid, and works with no other tools. No more putting your slide in a vice or driving with a punch. .

 
 

1 out of 1 people found the following review helpful

5 out of 5

Worth every penny!

 

I like another reviewer have mulled over buying this for a couple years. I have 2 Beretta 96FS that I love. I have had the novak sights sitting in my cabinet forever because every gunsmith I've talked too charges 50-80 dollars to do this job. This tool made it quick easy and I have the liberty to go back and make my own adjustments. I'm glad I finally made this purchase it really was worth every penny!

 
 

1 out of 1 people found the following review helpful

5 out of 5

The right tool for the job!

 

I am a firm believer in using the right tool to for the job. The Beretta Sight Adjustable Tool makes the task of removing the stock sight and installing a Novak sight on the 96A1 as simple as possible. Sure you can use other methods. Most likely you will mar your firearm in the process. If you care about doing a professional job on your weapon purchase this tool. It makes the job simple, quick, easy and does it with professional results. One caveat. This tool is made by MGW for Beretta. It is top quality. But the enclosed instructions for use are wrong for the sight removal from the slide of a model 96A1. Follow the Berretta picture guidance underneath the product picture. The MGW instructions tell you to push the original slide out from left to right. THIS WRONG! On the 96A1 push the sight out from right to left and then pull the Novak in from left to right. It takes 10 minutes for a professionally done, no mar finish. This tool is indispensable for the job.

Would you recommend this product to a friend? Yes
 
 

1 out of 1 people found the following review helpful

3 out of 5

Problem with target sight installation

 

I used this tool to exchange the original 92FS sight with the 92FS target sight. Removal of the original sight was easy. Initial installation of the new target sight was easy. However, removal of the assembled slide and target sight was not. I had to back off the sight to the left about 1/2 to remove the assembly and then finish the installation with a punch and light hammer. In the end it still made the install go OK.

 
 

1 out of 1 people found the following review helpful

5 out of 5

Worth it

 

I had my doubts for years about this thing, mainly because of the price. I recently purchased a Burris Fastfire for a competition 92 and decided I wanted the freedom of installation. I am impressed by the massive weight and build quality on this. I now see why it costs 130.00. Probably worth that in scrap if you change your mind.

 
 

1 out of 1 people found the following review helpful

5 out of 5

Excellent Tool

 

Works super and also fits my S&W 5906 AND 59 Series Firearms. Well worth it. Cheaper than going to have a gunsmith do it. Saves time and money, and easy to use.

Would you recommend this product to a friend? Yes
 
 

Join Our Email List

Sign up to receive emails from Beretta for special sales, new product developments, and select Beretta news.

SIGN UP NOW