Beretta Choke Tube OptimaChoke HP +Silver 20GA
Fits Beretta A400 Xtreme, A400 Xplor, A400 Xcel, 690, 692, DT11, A300 Xtrema, SV10
Beretta Optima-Choke® HP tubes stand up to the heat of competition. Manufactured from high strength steel and finished in a nickel-alloy coating, these chokes guarantee significant corrosion resistance and have the ability to withstand the rigors of steel shot. Optima-Choke® HP tubes are fully interchangeable on all Beretta barrels that are threaded for Optima-Choke® HP.
WARNING: Use of the Optima HP choke tube in an Optima firearm (without the HP designation) can cause severe damage to the choke tube and barrel when the shotgun is fired. Only use Optima HP choke tubes in these Optima HP shotguns: SV10 Perennia, SV10 Prevail, A400 Family of shotguns, 690, 692, DT-11 and UGB25 Sporting.
686 Silver Pigeon 1 Sporting models designated with SKU # J6869H0 and J6869H2 use Optima HP Chokes. Only use the approved choke type for your barrel. Use of improper choke tubes will cause barrel damage! For questions please contact Beretta USA or your retailer.
How Can I Identify My Choke Tubes?
Where can I find the constrictions or dimensions on my Beretta choke tubes?
Which Choke Tube Should I Use?
We suggest that - when using Steel Shot - you only use choke tubes marked with the SP (Steel Proof) identification on the side and that you use the most open choke system possible – i.e. Cylinder / Improved Cylinder / or Modified. We DO NOT recommend use of Steel Shot in the X-Tra Full Turkey / Full / or Improved Modified choke tube. As with any shotgun, always be sure to check your choke tubes during use to verify that they are tight in the barrel. Loose choke tubes can cause barrel damage.