Beretta Competition Thunder Holster for 92 Series - Right Hand Reviews

Back to Beretta Competition Thunder Holster for 92 Series - Right Hand

Most Helpful Positive Review
J

2 out of 2 people found the following review helpful

4 out of 5

Satisfied

 

Got this for a 92A1, I have a boss hanger setup for another pistol, thought this would be similar, it is close but not quite. Hanger is nice dark blue but the belt attachment bands included are red and screws are too long. The hanger is a straight piece of aluminum and is skinny at 0.125” vs boss at 0.215” and it looks skinny. Holster attachment is same dark blue but beefy at 0.2”. The holster is a standard thickness kydex with carbon fiber exterior. I replaced the top adjustment screw with a knurled knob so I can adjust pinch tension on the fly. There are extra ridges on the interior of the holster to capture the trigger guard and they make pinch adjustment very finicky. When adjusted for good tension and draw, the trigger guard removes material from these ridges. I will probably end up filing them off. The tilt adjustment works as advertised but spacers are easily crushed by the big screws. I am satisfied but not wowed and needed a hardware run to fix things and dial it in.

Would you recommend this product to a friend? Yes
Most Helpful Critical Review
L

2 out of 2 people found the following review helpful

1 out of 5

Disappointed

 

Holster doesn’t fit gun. Gun is loose and holster looks bent and out of shape! Junk

Would you recommend this product to a friend? No

Average Rating

3.6 out of 5
 

Based on 5 reviews

60% would recommend this item to a friend.

 
 
Would you recommend this product to a friend?
 
 
J

2 out of 2 people found the following review helpful

4 out of 5

Satisfied

 

Got this for a 92A1, I have a boss hanger setup for another pistol, thought this would be similar, it is close but not quite. Hanger is nice dark blue but the belt attachment bands included are red and screws are too long. The hanger is a straight piece of aluminum and is skinny at 0.125” vs boss at 0.215” and it looks skinny. Holster attachment is same dark blue but beefy at 0.2”. The holster is a standard thickness kydex with carbon fiber exterior. I replaced the top adjustment screw with a knurled knob so I can adjust pinch tension on the fly. There are extra ridges on the interior of the holster to capture the trigger guard and they make pinch adjustment very finicky. When adjusted for good tension and draw, the trigger guard removes material from these ridges. I will probably end up filing them off. The tilt adjustment works as advertised but spacers are easily crushed by the big screws. I am satisfied but not wowed and needed a hardware run to fix things and dial it in.

Would you recommend this product to a friend? Yes
 
 
L

2 out of 2 people found the following review helpful

1 out of 5

Disappointed

 

Holster doesn’t fit gun. Gun is loose and holster looks bent and out of shape! Junk

Would you recommend this product to a friend? No
 
 
L
5 out of 5

Disappointed

 

Fit is terrible! Holster looks bent or warped! Worthless Junk

Would you recommend this product to a friend? No
 
 
DM
5 out of 5

Great Holster Exactly Like Images And As Described!

 

My 92X Professional fits perfectly in this holster, locks nicely in place with the two adjustable hand screws on the side and draws smoothly. However, what I received does not look exactly like the images. The image shows a thicker drop, with a screw on the front edge that makes it look adjustable, so this was a big disappointment. I went to Beretta EU website and the picture of the Competition holster looks what I received from the USA website. I took a look at the Ghost website and the holster looks the same. The Beretta EU Ultimate, Thunder & Stinger holsters have the thicker adjustable drop. Had I seen these holsters first on EU website, I would have ordered my holster from the EU website. Beretta USA needs to change it's side photo to match the EU photo. Outside of the screws being too long, I have no complaints about the form, fit or functionality whatsoever.

Would you recommend this product to a friend? Yes
 
 
NP
3 out of 5

Product Received Not What the Image Shows

 

The 92X FS fits well and locks nicely in the holster. The draw is smooth and easy. However, the drop that I received does not look like the drop in the product image. The image on the web site shows a thicker drop bar with a screw head on the edge making it appear as if the holster pivots at that point on the drop. The drop that I received is flat and much thinner. The screws on the belt attachment are too long and must be modified to work for me. The holster comes with the smaller hex key for the belt attachment bars but not the hex key for the angle adjustment screws.

Would you recommend this product to a friend? Yes